Your Title Goes Here

Solution Description

Vacuum pump price 
we offer vacuum pump with iron impeller, Stainless metal impeller, iron pump head, stainless metal pump head.
the vacuum pump value in this page may be outof day. you should contact our income group to get the newest cost of our 2BV series vacuum pump.

2BV sequence Vacuum pumps are suited for evacuating gases and wet vapours down to inlet pressures of 33 mbar abs. (97% vacuum). All our vacuum pumps are outfitted with built-in cavitation defense. For procedure beneath 80 mbar ab muscles. the cavitation safety ought to be connected to protect the vacuum pump. All 2BV collection vacuum pumps are especially place-saving in their monoblock design and style. The two impeller and pump head are offered in solid iron and stainless metal.

The vacuum pump motors are equipped as regular for the enter voltage ranges of 50 and 60 Hz and for the defense group IP55. Vacuum pumps with ATEX 94/9 EG for classification 2G are accessible, also. The attributes are legitimate for the inlet of air with a relative humidity of 100 % and a temperature of twenty °C, compression to 1013 mbar abs. and drinking water at 15 °C as functioning liquid. The tolerance is ± 10 %

Main Characteristics:

The direct relationship of the motor and pump with the exact same shaft will save place and is handy to set up.

Adopting mechanical seal as standard gear, which removes leakage and tends to make the servicing practical.

Steady doing work and the sounds can low to sixty two decibel.

Exclusive design and style of versatile discharge port will not cause above compression which as a result, makes sure the ideal effectiveness of 2BV in the performance scope.

All the 2BV series have the relationship port of the cavitation protection pipe. E.g. when the pump work underneath restricted force, opening the link port of the cavitation defense pipe or connecting with the separator can eliminate the cavitation audio underneath the condition that the suction effect can be produced certain at utmost and safeguard the pump.

All the roughs of all the types in the 2BV sequence adopt precise casting( stainless steel and normal content).

All the factors are processed precisely by the CNC lathe, and the mechanical seal adopts imported johncrane or HangZhou Bergman to make sure the precision.

All adopt CZPT or CZPT imported bearing.

 

 

2BV-F series liquid ring vacuum pump/compressor is mainly used to pump explosive fuel, and operates in all the flammable and explosive surroundings. Its efficiency parameters are the exact same as pertinent types in 2BV-B, 2BV-E sequence.

2BV liquid ring vacuum pump: mode expression technique

Detailed specification

 

Model Max. suction ability Ultimate vacuum
mbar(MPa)
Motor electricity
kW
Speed
r.p.m
Operating liquid

 

circulation price
L/min

Noise
dB(A)
Weight
kg
m3/min m3/h
2BV2060 .forty five 27  

 

 

 

 

 

 

33mbar
(-.097MPa)

.81 2840 two.five sixty two 37
2BV2061 .86 fifty two 1.forty five 2840 2.5 sixty five 41
2BV2070 1.33 eighty 2.35 2860 3 sixty six sixty six
2BV2071 1.eighty three one hundred ten three.eighty five 2880 4.seven seventy two 85
2BV5110 2.seventy five a hundred sixty five 4 1440 7.two sixty three one hundred twenty
2BV5111 three.83 230 5.5 1440 eight.8 sixty eight one hundred fifty
2BV5121 four.sixty six 280 seven.five 1440 eleven sixty nine 210
2BV5131 six.sixty six 400 eleven 1460 16 seventy three 280
2BV5161 eight.33 five hundred fifteen 970 22 seventy four 390
2BV6110 2.seventy five one hundred sixty five 4 1440 sixty seven sixty three one hundred fifty
2BV6111 three.eighty three 230 five.5 1440 10 68 two hundred
2BV6121 four.sixty six 280 seven.5 1440 12 69 230
2BV6131 six.sixty six 400 11 1460 17 73 315
2BV6161 eight.33 500 15 970 23 seventy four 426

Software

The main application spot of the 2BV liquid ring vacuum pump:

Vacuum filtration Vacuum distillation vacuum disinfectionPolyester manufacturing
Vacuum packing  Food drying Vacuum water diversion Vacuum immersion
Plastic molding  liquid separating from gas Running room and health-related sputum suction

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Oil or Not: Oil Free
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Model Max. suction capacity Ultimate vacuum
mbar(MPa)
Motor power
kW
Speed
r.p.m
Operating liquid

 

flow rate
L/min

Noise
dB(A)
Weight
kg
m3/min m3/h
2BV2060 0.45 27  

 

 

 

 

 

 

33mbar
(-0.097MPa)

0.81 2840 2.5 62 37
2BV2061 0.86 52 1.45 2840 2.5 65 41
2BV2070 1.33 80 2.35 2860 3 66 66
2BV2071 1.83 110 3.85 2880 4.7 72 85
2BV5110 2.75 165 4 1440 7.2 63 120
2BV5111 3.83 230 5.5 1440 8.8 68 150
2BV5121 4.66 280 7.5 1440 11 69 210
2BV5131 6.66 400 11 1460 16 73 280
2BV5161 8.33 500 15 970 22 74 390
2BV6110 2.75 165 4 1440 67 63 150
2BV6111 3.83 230 5.5 1440 10 68 200
2BV6121 4.66 280 7.5 1440 12 69 230
2BV6131 6.66 400 11 1460 17 73 315
2BV6161 8.33 500 15 970 23 74 426
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Oil or Not: Oil Free
Structure: Rotary Vacuum Pump
Exhauster Method: Positive Displacement Pump

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Model Max. suction capacity Ultimate vacuum
mbar(MPa)
Motor power
kW
Speed
r.p.m
Operating liquid

 

flow rate
L/min

Noise
dB(A)
Weight
kg
m3/min m3/h
2BV2060 0.45 27  

 

 

 

 

 

 

33mbar
(-0.097MPa)

0.81 2840 2.5 62 37
2BV2061 0.86 52 1.45 2840 2.5 65 41
2BV2070 1.33 80 2.35 2860 3 66 66
2BV2071 1.83 110 3.85 2880 4.7 72 85
2BV5110 2.75 165 4 1440 7.2 63 120
2BV5111 3.83 230 5.5 1440 8.8 68 150
2BV5121 4.66 280 7.5 1440 11 69 210
2BV5131 6.66 400 11 1460 16 73 280
2BV5161 8.33 500 15 970 22 74 390
2BV6110 2.75 165 4 1440 67 63 150
2BV6111 3.83 230 5.5 1440 10 68 200
2BV6121 4.66 280 7.5 1440 12 69 230
2BV6131 6.66 400 11 1460 17 73 315
2BV6161 8.33 500 15 970 23 74 426

What makes pulleys so important?

A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let’s take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let’s dive into them.
pulley

Mechanical advantage

If you’ve ever used rope and pulley systems, you’ve probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved one foot up by three feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have two mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The three factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the two wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why two rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.

type

There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on one end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A “V” pulley requires a “V” belt to transmit power. Some of these pulleys have multiple “V” grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at one end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are two main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it’s easy to decide which one is best for you.
pulley

application

Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let’s take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.

cost

In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.

lubricating

The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
pulley

Compound Pulley System

A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of three components: a drive pulley, one or more driven pulleys, and two pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than two ropes if necessary. This increases the range of motion of the lift arm.

China 2BV2061 Liquid-Ring Pump Watering Vacuum Pump with Stainless Steel Vacuum Pump Head     pulley driveChina 2BV2061 Liquid-Ring Pump Watering Vacuum Pump with Stainless Steel Vacuum Pump Head     pulley drive
editor by czh 2022-11-28

Recent Posts